Manganese Steel Tank Semi Trailer




High-quality manganese steel is used to construct the tank. The tank chamber is separated into several sections by upright walls, or partition walls. These walls prevent the formation of petrol wave when the tank trailer is driving on a bumpy road. At the lower end of the wall, through holes are drilled to reduce the impact and enhance the tank strength.

Combination lids are set on the top of the tank. They comprise of two lids, with the self-locking smaller one sits on the larger one. A breather valve is installed on the larger lid to prevent pressure or vacuum buildup.

The tank is grounded to discharge static electricity produced by the rubber tire, which might cause fire during fuel transfer operation. Upon your request, we can add a power take-off system to the tank that is powered by gearbox, which controls the tank to either sucks in or discharge fuel. The tank of our semi trailer also comes with two hoses and quick couplers. Its suction head is 6 meters. Two fire extinguishers and other specialized tools are also sure to come in handy during emergency. The whole tank semi trailer is comprised of two parts, the tank assembly and tank support.



Tank Body
Shape Round or Square
Dimension 12000mm×2490mm×3990mm ( The exact size depends on the final design.)
Tare weight About 8000kg-12800kg
Total Volume ( m3 ) 25m³ -60 m³
Tanker Body Material 5mm or 6mm/ manganese steel
End Plate 5mm or 6mm/ manganese steel
Manhole Cover Carbon steel or aluminum alloy API manhole cover, 500mm(diameter)
Bottom Valve Aluminum API Pneumatic Bottom Valve
Discharging Valve Diameter is 3 or 4 inch
Compartments Optional
Discharging Pipe 4” rubber hose, 2 pcs , 6m/each
Cat Walk With (Common model or special design)
Chassis
Main Beams Welded design or Special design I beam, connected by bolts and nutsQ345 carbon steel material
Axle 2 or 3 axles, BPW/FUWA/HUAJING brand
Landing Gear JOST (D200T ) or CHINA BRAND 28T
King Pin JOST 2.00 or 3.5 inch bolt-in king pin
Suspension Mechanical suspension/Germany or America type /air suspension
Leaf Spring 90(W)mm×13(Thickness)mm×10layers or 10mm×12mm×12 /without
Pneumatic Braking System WABCO RE 6 relay valve; Spring brake chamber (TKL brand ); one piece of 45L air tank
Rim 9.00-22.5/8.00-20/8.5-20 China Brand
Tire /12.00R22.5/315 80R22.5/11.00R20 /12.00R20 Brand can be Optional
ABS Optional
Painting Sandblasted, anti-rust chassis surface is available with 1 layer of anticorrosive primer and 2 layers of top coats.
Accessories One standard tool box
Shipping Terms By bulk cargo ,RORO or 40HQ Containers


Tags: , ,

Feedback

Your Name*

Your Email*

Subject

Your Message

Captcha: captcha